Konica Minolta

To install Konica Minolta Copier as a printer on Mac OS X

1. Click on System Preferences
2. Click on Print & Fax under hardware section
3. Click on + sign to add new printer
4. Click on IP on top selection
5. Select Protocol LPD-Line Printer Daemon
6. In the Address box type IP address of Konica (see below for the IP)
7. Leave Que section blank
8. You should get the sentence “Valid and complete address” under IP address
9. In the Print using box click the arrow and pick the Konica copier you are installing
10. To set the users code for the Konica start a document in any word processor
11. Click File and print. This will bring up the printer selection box.
12. Select the Konica model you want to setup.
13. In the third select box (usually defaults to Copies & Pages) select security
14. This will open the authentication selections, select box on Account Track
15. Put users code in the Department Name box - leave password blank
16. Before you hit Print, go up to Presets and select save as to save your user code.
17. If you have multiple printers be sure that when you print to the Konica’s the right Preset is selected (Mac won’t save it for each printer, it remembers only the last one used)

Specifics for the CSE Copier: